Bradley Knight Popular Books

Bradley Knight Biography & Facts

The Bradley Fighting Vehicle (BFV) is a tracked armored fighting vehicle of the United States developed by FMC Corporation and now manufactured by BAE Systems Land & Armaments, formerly United Defense. It is named for U.S. General Omar Bradley. The Bradley is designed to transport infantry or scouts with armor protection, while providing covering fire to suppress enemy troops and armored vehicles. Variants include the M2 Bradley infantry fighting vehicle and the M3 Bradley reconnaissance and infantry fighting vehicle. The M2 holds a crew of three—a commander, a gunner and a driver—along with six fully equipped soldiers. The M3 mainly conducts scout missions and carries two scout troopers in addition to the regular crew of three, with space for additional BGM-71 TOW missiles. In 2014, the U.S. Army selected BAE Systems' Armored Multi-Purpose Vehicle (AMPV) proposal of a turretless variant of the Bradley to replace over 2,800 M113 armored personnel carriers. Some 2,907 surplus Bradleys will be modified to become AMPVs for the U.S. Army. Design The Bradley was developed largely in response to the Soviet BMP family of infantry fighting vehicles. The Bradley was meant to serve as an armored personnel carrier and a tank-killer. One design requirement specified that it should be as fast as the M1 Abrams main battle tank, so the vehicles could maintain formation. Armament The M2/M3's primary armament is a 25 mm chain gun using either 100 or 300 rounds per minute, accurate to 1.9 mi (3,000 metres). It is armed with a TOW missile launcher capable of carrying two loaded missiles. The missiles, capable of destroying most tanks to a maximum range of 13,000 ft (4,000 m), can only be fired while the vehicle is stationary. The Bradley carries a coaxial 7.62 mm medium machine gun to the right of the chain gun. Primary The Bradley is equipped with the 25 mm M242 Bushmaster as its main weapon. The M242 is a single-barrel chain gun with an integrated dual-feed mechanism and remote feed selection. The cannon carries 300 rounds of ammunition in two ready boxes (one of 70 rounds, the other of 230 rounds), with an extra 600 rounds in storage for the M2 Infantry Fighting Vehicle variant or 1,200 stowed rounds for the M3 Cavalry Fighting Vehicle variant. The two ready-boxes allow a selectable mix of rounds, such as the M791 APDS-T (Armor-Piercing Discarding Sabot (with) Tracer) and M792 HEI-T (High Explosive Incendiary (with) Tracer) rounds. The tungsten APDS-T rounds proved effective in Desert Storm, capable of knocking out many Iraqi vehicles, including several T-55 tanks. Subsequent ammunition developments resulted in the M919 APFSDS-T (armor-piercing fin-stabilized discarding sabot (with) tracer) round containing a finned depleted uranium penetrator similar in concept to armor-piercing munitions used in modern tanks. The M919 was used in combat during the 2003 invasion phase of Operation Iraqi Freedom. Secondary An M240C medium machine gun is mounted coaxially to the M242, with 2,200 rounds of 7.62x51 mm ammunition. For engaging heavier targets, such as acting as an anti-tank gun, the Bradley carries a TOW missile system. This was modified to fire TOW II missiles from the M2A1 model onward. M2 infantry Bradleys have firing ports for M231 Firing Port Weapons (FPWs), providing a means for the occupants to fire from within the vehicle and replacing the top-side gunners on the M113-based Armored Cavalry Assault Vehicles, although the M231 is rarely employed. Initial variants had six ports, but the side ports were plated over with the armor configuration on the A2 and A3 variants, leaving only the two rear-facing mounts in the loading ramp. No versions of the M3 CFV carry firing port weapons. Early versions had all six firing port mounts fitted and plated over. Newer versions retain the two ramp-mounted firing ports, though plated over. Countermeasures The use of aluminum armor and the storage of large quantities of ammunition in the vehicle initially raised questions about its combat survivability. Spaced laminate belts and high-hardness steel skirts have been added to improve the side protection of later versions, while overall weight was increased to 33 tons. All versions are equipped with two four-barreled smoke grenade launchers on the front of the turret for creating defensive smoke screens, which can also be loaded with chaff and flares. Bradley Urban Survival Kit The Bradley Urban Survival Kit (BUSK) is an upgrade similar to the M1 Abrams TUSK kit. It decreases the vulnerability of Bradleys in urban environments. The kit includes a more powerful spotlight, a wire mesh protector to keep the optics from getting scratched, and nonconductive arched strips of nylon that push away fallen electrical wires (power line protection) that would endanger crews, additional armor on the underside, and a bullet-resistant transparent shield for the commander outside the turret. It includes sensors and a software package to quickly detect when components are wearing out, and simulation software so gunners can train more realistically. The BUSK kit adds 3 tons to the vehicle's weight. Because of this, a major upgrade was planned. Additional upgrades included a stronger, 800 horsepower engine, a larger main gun, lighter armor, improved sensors and cameras to give a 360° view outside, and an improved fire extinguisher system. This system was supposed to enter service in 2012, but the Bradley became too heavy and the kit did not make it survivable enough. A newer BUSK III kit is now available for Bradleys incorporating a blastproof fuel cell, a blast-resistant driver seat, a turret survivability system, and an emergency ramp release. This kit was recently installed on 236 M2A3 Bradleys in South Korea and is scheduled next to be added to Bradleys of the 4th Infantry Division. As of late July 2023, Ukrainian Bradleys have been fitted with BUSK upgraded armor and Bradley Reactive Armor Tiles. Mobility The Bradley is highly capable in cross-country open terrain, in accordance with one of the main design objectives of keeping pace with the M1 Abrams main battle tank. The Bradley was initially designed to float by deploying a flotation curtain around the vehicle, allowing it to "swim" at a speed of 4.5 mph (7.2 km/h). Later armor upgrades have negated this capability. History Development One of the early issues that drove the development of the infantry fighting vehicle (IFV) was the need to have a vehicle that could serve in a high-intensity conflict in Europe, which was feared might include the use of nuclear, biological or chemical (NBC) type weapons. To work in such an environment, an IFV would have to have a life support system that protected from outside contaminants, while allowing the soldiers to fight from inside the vehicle. The earliest specification, from 1958, called for a vehicle of no more than 8 tons, mounting a turret with a 20 mm autocannon and a 7.62 mm machine gun, with sealed f.... Discover the Bradley Knight popular books. Find the top 100 most popular Bradley Knight books.