K L Walther Popular Books

K L Walther Biography & Facts

The Walther PP (German: Polizeipistole, or police pistol) series pistols are blowback-operated semi-automatic pistols, developed by the German arms manufacturer Carl Walther GmbH Sportwaffen. It features an exposed hammer, a traditional double-action trigger mechanism, a single-column magazine, and a fixed barrel that also acts as the guide rod for the recoil spring. The series includes the Walther PP, PPK, PPK/S, and PPK/E models. The Walther TPH pocket pistol is a smaller calibre pistol introduced in 1971 which is identical in handling and operation to the PPK. Various PP series are manufactured in Germany, France and the United States. In the past, the PPK version was manufactured by Walther in its own factory in Germany, as well as under licenses by Manurhin in France; Interarms in Virginia, and by Smith & Wesson in Maine. Since 2018, PPK and PPK/S models have been built at the factory of US-based subsidiary Walther Arms, Inc. The PP and the PPK were among the world's first successful double action semi-automatic pistols. The PPK is still manufactured by Walther, but the PP went out of production in 1999 and have been widely copied. The design inspired other pistols, among them the Soviet Makarov, the Hungarian FEG PA-63, the Polish P-64, the American Accu-Tek AT-380 II, and the Argentine Bersa Thunder 380. The PP and PPK were both popular with European police and civilians for being reliable and concealable. During World War II, they were issued to the German military (officers), including the Luftwaffe, as well as the uniformed Ordnungspolizei and plainclothes detectives of the Kriminalpolizei. PP series The original PP was released in 1929. It was designed for police use and was used by police forces in Europe in the 1930s and later. The semi-automatic pistol operated using a simple blowback action. The PP was designed with several safety features, some of them innovative, including an automatic hammer block, a combination safety/decocker and a loaded chamber indicator. Variants PPK The most common variant is the Walther PPK, a smaller version of the PP with a shorter grip, barrel and frame, and reduced magazine capacity. A new, two-piece wrap-around grip panel construction was used to conceal the exposed back strap. The smaller size made it more concealable than the original PP and hence better suited to plain-clothes or undercover work. It was released in 1931. "PPK" is an abbreviation for Polizeipistole Kriminal (literally "police pistol criminal"), referring to the Kriminalamt crime investigation office. While the K is often mistakenly assumed to stand for kurz (German for "short"), as the variant has a shorter barrel and frame, Walther used the name "Kriminal" in early advertising brochures and the 1937 GECO German catalog. The PPK saw widespread use. Nazi leader Adolf Hitler committed suicide with his PPK in the Führerbunker in Berlin. A Walther PPK .32 (gun number 159270) was used by Kim Jae-gyu to kill South Korean leader Park Chung Hee. A PPK carried by Princess Anne's personal police officer James Beaton infamously jammed during a kidnapping attempt on the princess and her husband. The fictional secret agent James Bond uses a Walther PPK in many of the novels and films: Ian Fleming's choice of Bond's weapon directly influenced the popularity and notoriety of the PPK. Fleming had given Bond a .25 Beretta 418 pistol in early novels but switched to the PPK in Dr. No (1958) on the advice of firearms expert Geoffrey Boothroyd. Although referred to as a PPK in the film adaption of 1962, the actual gun carried by actor Sean Connery was a Walther PP. Actor Jack Lord, who played Felix Leiter in Dr. No, was presented with a gold-plated PPK with ivory handgrips, given to him by his friend Elvis Presley. Presley himself owned a silver-finish PPK, inscribed "TCB" ("taking care of business"). PPK/S The PPK/S was developed following the enactment of the Gun Control Act of 1968 (GCA68) in the United States, the pistol's largest market. One of the provisions of GCA68 banned the importation of pistols and revolvers not meeting certain requirements of length, weight, and other "sporting" features into the United States. The PPK failed the "Import Points" test of the GCA68 by a single point. Walther addressed this situation by combining the PP's frame with the PPK's barrel and slide to create a pistol that weighed slightly more than the PPK. The additional ounce or two of weight of the PPK/S compared to the PPK was sufficient to provide the extra needed import points. Because U.S. law allowed domestic production (as opposed to importation) of the PPK, manufacture began under license in the U.S. in 1983; this version was distributed by Interarms. The version currently manufactured by Walther Arms in Fort Smith, Arkansas has been modified (by Smith & Wesson) by incorporating a longer grip tang (S&W calls it "extended beaver tail"), better protecting the shooter from slide bite, i.e., the rearward-traveling slide's pinching the web between the index finger and thumb of the firing hand, which could be a problem with the original design for people with larger hands or an improper grip, especially when using more powerful cartridge loads. The PPK/S is made of stainless steel. There are also blued examples. The PPK/S differs from the PPK as follows: Overall height: 104 mm (4.1 in) vs. 100 mm (3.9 in) Weight: the PPK/S weighs 51 g (1.8 oz) more than the PPK The PPK/S magazine holds one additional round, in both calibers. The PPK/S and the PPK are offered in the following calibers: .32 ACP (with capacities of 8 for PPK/S and 7 for PPK); or .380 ACP (PPK/S: 7; PPK: 6). The PPK/S is also offered in .22 LR with capacity of 10 rounds. PPK-L In the 1960s, Walther produced the PPK-L, which was a lightweight variant of the PPK. The PPK-L differed from the standard, all steel PPK in that it had an aluminium alloy frame. These were only chambered in 7.65mm Browning (.32 ACP) and .22 LR because of the increase in felt recoil from the lighter weight of the gun. All other features of the postwar production PPK (brown plastic grips with Walther banner, high polished blue finish, lanyard loop, loaded chamber indicator, 7+1 magazine capacity and overall length) were the same on the PPK-L. PP Super First marketed in 1972, this was an all-steel variant of the PP chambered for the 9×18mm Ultra cartridge. Designed as a police service pistol, it was a blowback operated, double-action pistol with an external slide-stop lever and a firing-pin safety. A manual decocker lever was on the left side of the slide; when pushed down, it locked the firing pin and released the hammer. When the 9×19mm Parabellum was chosen as the standard service round by most of the German police forces, the experimental 9mm Ultra round fell into disuse. Only about 2,000 PP Super pistols were sold to German police forces in the 1970s, and lack of sales caused Walther to withdraw the PP Super from their.... Discover the K L Walther popular books. Find the top 100 most popular K L Walther books.