Chris Marshall Woodworker S Journal John Popular Books

Chris Marshall Woodworker S Journal John Biography & Facts

Shellac () is a resin secreted by the female lac bug on trees in the forests of India and Thailand. Chemically, it is mainly composed of aleuritic acid, jalaric acid, shellolic acid, and other natural waxes. It is processed and sold as dry flakes and dissolved in alcohol to make liquid shellac, which is used as a brush-on colorant, food glaze and wood finish. Shellac functions as a tough natural primer, sanding sealant, tannin-blocker, odour-blocker, stain, and high-gloss varnish. Shellac was once used in electrical applications as it possesses good insulation qualities and seals out moisture. Phonograph and 78 rpm gramophone records were made of shellac until they were replaced by vinyl long-playing records from 1948 onwards. From the time shellac replaced oil and wax finishes in the 19th century, it was one of the dominant wood finishes in the western world until it was largely replaced by nitrocellulose lacquer in the 1920s and 1930s. Besides wood finishing, shellac is used as an ingredient in food, medication and candy such as confectioner's glaze, as well as a means of preserving harvested citrus fruit. Etymology Shellac comes from shell and lac, a partial calque of French laque en écailles, 'lac in thin pieces', later gomme-laque, 'gum lac'. Most European languages (except Romance ones and Greek) have borrowed the word for the substance from English or from the German equivalent Schellack. Production Shellac is scraped from the bark of the trees where the female lac bug, Kerria lacca (order Hemiptera, family Kerriidae, also known as Laccifer lacca), secretes it to form a tunnel-like tube as it traverses the branches of the tree. Though these tunnels are sometimes referred to as "cocoons", they are not cocoons in the entomological sense. This insect is in the same superfamily as the insect from which cochineal is obtained. The insects suck the sap of the tree and excrete "sticklac" almost constantly. The least-coloured shellac is produced when the insects feed on the kusum tree (Schleichera). The number of lac bugs required to produce 1 kilogram (2.2 lb) of shellac has variously been estimated between 50,000 and 300,000. The root word lakh is a unit in the Indian numbering system for 100,000 and presumably refers to the huge numbers of insects that swarm on host trees, up to 150 per square inch (23/cm2). The raw shellac, which contains bark shavings and lac bugs removed during scraping, is placed in canvas tubes (much like long socks) and heated over a fire. This causes the shellac to liquefy, and it seeps out of the canvas, leaving the bark and bugs behind. The thick, sticky shellac is then dried into a flat sheet and broken into flakes, or dried into "buttons" (pucks/cakes), then bagged and sold. The end-user then crushes it into a fine powder and mixes it with ethyl alcohol before use, to dissolve the flakes and make liquid shellac. Liquid shellac has a limited shelf life (about 1 year), so is sold in dry form for dissolution before use. Liquid shellac sold in hardware stores is often marked with the production (mixing) date, so the consumer can know whether the shellac inside is still good. Some manufacturers (e.g., Zinsser) have ceased labeling shellac with the production date, but the production date may be discernible from the production lot code. Alternatively, old shellac may be tested to see if it is still usable: a few drops on glass should dry to a hard surface in roughly 15 minutes. Shellac that remains tacky for a long time is no longer usable. Storage life depends on peak temperature, so refrigeration extends shelf life. The thickness (concentration) of shellac is measured by the unit "pound cut", referring to the amount (in pounds) of shellac flakes dissolved in a gallon of denatured alcohol. For example: a 1-lb. cut of shellac is the strength obtained by dissolving one pound of shellac flakes in a gallon of alcohol (equivalent to 120 grams per litre). Most pre-mixed commercial preparations come at a 3-lb. cut. Multiple thin layers of shellac produce a significantly better end result than a few thick layers. Thick layers of shellac do not adhere to the substrate or to each other well, and thus can peel off with relative ease; in addition, thick shellac will obscure fine details in carved designs in wood and other substrates. Shellac naturally dries to a high-gloss sheen. For applications where a flatter (less shiny) sheen is desired, products containing amorphous silica, such as "Shellac Flat", may be added to the dissolved shellac. Shellac naturally contains a small amount of wax (3%–5% by volume), which comes from the lac bug. In some preparations, this wax is removed (the resulting product being called "dewaxed shellac"). This is done for applications where the shellac will be coated with something else (such as paint or varnish), so the topcoat will adhere. Waxy (non-dewaxed) shellac appears milky in liquid form, but dries clear. Colours and availability Shellac comes in many warm colours, ranging from a very light blonde ("platina") to a very dark brown ("garnet"), with many varieties of brown, yellow, orange and red in between. The colour is influenced by the sap of the tree the lac bug is living on and by the time of harvest. Historically, the most commonly sold shellac is called "orange shellac", and was used extensively as a combination stain and protectant for wood panelling and cabinetry in the 20th century. Shellac was once very common anywhere paints or varnishes were sold (such as hardware stores). However, cheaper and more abrasion- and chemical-resistant finishes, such as polyurethane, have almost completely replaced it in decorative residential wood finishing such as hardwood floors, wooden wainscoting plank panelling, and kitchen cabinets. These alternative products, however, must be applied over a stain if the user wants the wood to be coloured; clear or blonde shellac may be applied over a stain without affecting the colour of the finished piece, as a protective topcoat. "Wax over shellac" (an application of buffed-on paste wax over several coats of shellac) is often regarded as a beautiful, if fragile, finish for hardwood floors. Luthiers still use shellac to French polish fine acoustic stringed instruments, but it has been replaced by synthetic plastic lacquers and varnishes in many workshops, especially high-volume production environments. Shellac dissolved in alcohol, typically more dilute than as used in French polish, is now commonly sold as "sanding sealer" by several companies. It is used to seal wooden surfaces, often as preparation for a final more durable finish; it reduces the amount of final coating required by reducing its absorption into the wood. Properties Shellac is a natural bioadhesive polymer and is chemically similar to synthetic polymers. It can thus be considered a natural form of plastic. With a melting point of 75 °C (167 °F), it can be classed as a thermoplastic used to bind wood flour.... Discover the Chris Marshall Woodworker S Journal John popular books. Find the top 100 most popular Chris Marshall Woodworker S Journal John books.