Cecelia Collett Popular Books

Cecelia Collett Biography & Facts

The Great Western Railway 2900 Class or Saint Class, which was built by the Great Western Railway's Swindon Works, incorporated several series of 2-cylinder passenger steam locomotives designed by George Jackson Churchward and built between 1902 and 1913 with differences in the dimensions. The majority of these were built as 4-6-0 locomotives; but thirteen examples were built as 4-4-2 (but converted to 4-6-0 during 1912/13). They proved to be a highly successful class which established the design principles for GWR 2-cylinder classes over the next fifty years, and influenced similar classes on other British railways. Background After finally converting the last broad gauge lines in 1892, the Great Western Railway (GWR) began a period of modernization as new cut-off lines shortened its routes to west of England, South Wales and Birmingham. During the first decade of the twentieth century the Chief Mechanical Engineer, George Jackson Churchward, designed or acquired a number of experimental locomotives with different wheel arrangements and boiler designs to help him plan for the future motive power needs of the railway. The first of these was a two-cylinder 4-6-0 locomotive, designed in 1901 whilst Churchward was still the Chief Assistant of his predecessor William Dean. Prototypes Between 1902 and 1905 Churchward built and tested three prototype locomotives with detail differences, before using the third as the basis for the production series. No. 100 The first prototype was completed at the Swindon Works of the GWR (Lot 132) in February 1902. It was numbered 100 and in June 1902 was named Dean (later William Dean) to mark the latter's retirement. The new design incorporated all of Churchward's current ideas including a domeless parallel boiler, raised Belpaire firebox, 19 in (48.3 cm) diameter outside cylinders with 30 in (76.2 cm) piston stroke, and boiler pressure of 200 psi (1.38 MPa). The piston valves were driven by rocking levers actuated by the expansion link of Stephenson valve gear – this particular design was only used on no. 100. The parallel boiler was later replaced with a taper boiler, and then the first superheated taper boiler in 1910. Churchward had studied American boiler design, but he was also later influenced by continental practice in efficient motion design. From the Société Alsacienne de Constructions Mécaniques (SACM) a de Glehn 4-4-2 compound engine was ordered for comparative trials on the GWR. According to E.C. Poultney, No. 100 was the first 4-6-0 locomotive to have high enough boiler capacity and steam ports large enough to handle the steam flow required by large cylinders: "The engine probably influenced to a large extent the use made of engines of the 4-6-0 type". No.100 was renumbered 2900 in 1912, and was withdrawn from service in 1932. No. 98 A second prototype locomotive, No. 98, was built at Swindon Works in March 1903 (Lot 138) to a similar design but with a taper boiler, re-designed valve gear layout and cylinders and a shorter wheelbase. Valve diameters were increased from 6+1⁄2 inches (170 mm) to 10 inches (250 mm). According to Poultney, these improvements "may truly be said to be the keystone of the arch upon which all modern locomotives are designed". In 1906 this locomotive was re-boilered with a 225 psi (1.55 MPa) boiler to correspond with the third prototype. This prototype locomotive was named Vanguard in 1907 (renamed Ernest Cunard in the same year). It was renumbered 2998 in 1912, received a superheated boiler in 1911 and was withdrawn in 1933. No. 171 A third prototype, No. 171, was built at Swindon in December 1903 (Lot 145) incorporating the improvements to No. 98 but with a 225 psi (1.55 MPa) boiler and minor amendments to the heating surface and grate area. It was built as a 4-6-0 but in October 1904 it was converted to a 4-4-2 to enable better comparison with the performance of the French built de Glehn 4-4-2 Compound; it was reconverted to 4-6-0 in July 1907. The conversion was carried out by substituting 4 ft 1+1⁄2 in (1.257 m) trailing wheels with outside suspension for the final set of driving wheels. It was named Albion in 1904, renumbered 2971 in 1912, received a superheated boiler in 1910 and was withdrawn in 1946. No. 171 formed the basis of the main production series, introduced in 1905, although at this time Churchward was still unsure of the relative merits of the 4-4-2 and 4-6-0 wheel arrangements. Production series The Saint class appeared in four production series built between 1905 and 1913, each of which differed in dimensions. There were also differences between members of each series in terms of the boilers used, wheel arrangement, and arrangements for superheating. Different series and individual locomotives within series were also fitted with different tenders ranging from 3,500 imp gal (16,000 L; 4,200 US gal) to 4,000 imp gal (18,000 L; 4,800 US gal) capacity. Scott series Whilst 171 was undergoing trials in 1905 nine further locomotives were ordered to be built at Swindon Works to a similar design (Lot 154) followed by a further ten (Lot 158), totalling 19 locomotives in this series. Thirteen of these were built as 4-4-2s and six as 4-6-0s. However, by January 1913, Churchward was persuaded by the superior adhesion provided by a 4-6-0 and they had all been converted to this wheel arrangement. The new locomotives were numbered 172–190 (renumbered 2972–2990 in 1912). Twelve of the series were named after characters in the novels of Sir Walter Scott. Directors of the GWR accounted for most of the other names. The series was withdrawn between 1931 and 1951. Ladies A second series of ten similar locomotives appeared in May 1906 (Swindon Lot 164), numbered 2901–10 and named after historical, mythological or poetical 'Ladies'. Nos. 2904–6 had short tapered boilers and short smokeboxes, whereas Nos. 2902–03 and 2907–10 had longer versions. All except 2901 had 18.125 in × 30 in (460 mm × 762 mm) cylinders, giving a tractive effort of 23,382 lbf (104.01 kN). No. 2901 Lady Superior was the first British locomotive to be built with a modern Schmidt superheater. The remainder of the locomotives were fitted with Swindon No.3 superheaters between 1909 and 1911 and were withdrawn between 1933 and 1952. In May 1906 Charles Collett, then assistant manager of Swindon Works, supervised a demonstration run of number 2903 Lady of Lyons, newly released from the erecting shop. By mile-post timings observed from the engine and from passing times recorded at Little Somerford and Hullavington signal boxes, 4+1⁄2 miles apart and with a descending gradient of 1 in 300 between them, a speed of approximately 120 miles per hour (190 km/h) was recorded, but not in a sufficiently accurate manner as to be considered a record. Saints A third series of twenty further locomotives appeared during August and September 1907 (Swindon Lot 170), numbered 2911–30 and named after Saints. The framing for these had lon.... Discover the Cecelia Collett popular books. Find the top 100 most popular Cecelia Collett books.